Discussion Topic |
|
This thread has been locked |
Oldfattradguy2
Trad climber
Here and there
|
|
|
Jan 14, 2019 - 07:49pm PT
|
Once you sell it it is commercial.....most regulators look the other way for the minor stuff like moms making a few pieces of jewelry. I used to speak to rockhounding clubs to explain the regs.
I didn’t really mean actual gemstones...just fancy rocks like the Tiffany stone you mentioned.
On another note: glad to see the tradition of gunks folks selling chalk bags lives on, did the same over 30 years ago.
|
|
Bale
Mountain climber
UT
|
|
|
Jan 14, 2019 - 09:01pm PT
|
No, I’m a neighbor of his when he’s up here. He helped me gather firewood this year, cool guy.
|
|
Happiegrrrl2
Trad climber
|
|
|
Topic Author's Reply - Jan 15, 2019 - 07:35am PT
|
Got it, Bale.
Got it, OFTG2(think that's right). Guy I got Tiffany Stone from, I highly doubt would be a skofflaw on that count. He has been offering it a few months now, and is an Oregon-based guy who has claims up there. He offers rough from that region, and buys good rough to slab and cab. He also gets rough from other big sellers here to slice up for us. But I will beware. If I had a claim, I sure wouldn't want poachers.
Also, yes, I realize my work is commercial and where the line on that is.
|
|
Happiegrrrl2
Trad climber
|
|
|
Topic Author's Reply - Jan 16, 2019 - 12:23pm PT
|
Okay, finally I have an actual "What do ya think is wrong?" question thus trip!
So, the phone wasn't charging when I plugged it into the inverter....
Yes, I did check the fuses. The *cigar lighter* - it is a '90 model - was blown. Replaced it.
Still doesn't work. I plugged in the tire filler upper to check. That went direct into the socket. No inverter, so its not the inverter.
Is this a case where a multimeter would actually be helpful?
If so, what do I do with this multimeter thing.....
|
|
Flip Flop
climber
Earth Planet, Universe
|
|
|
Jan 16, 2019 - 12:46pm PT
|
Charging a phone on an inverter is a waste of energy and adds wear to the inverter and battery. Replace the cigar lighter with a 12volt socket.
|
|
Happiegrrrl2
Trad climber
|
|
|
Topic Author's Reply - Jan 16, 2019 - 01:36pm PT
|
Yes, it seems the electrical issue is between the fuse(replaced) and cigar lighter, as the items do work when plugged in other electrical plugs.
I only use the inverter when the engine is running and I'm driving. I don't use it off the battery.
|
|
Happiegrrrl2
Trad climber
|
|
|
Topic Author's Reply - Feb 16, 2019 - 11:43am PT
|
Okay, here comes the "Chalkbags and Artisan Jewelry" promo. Have at it, though who dislike these portions of the Happiegrrrl Travel Log....
The van needs framework, and fast. I've made an appointment and trying not to use the van until the issue is resolved. I heard metal on metal about a week ago, and hoped there was just a pebble in there, since I'd had all brakes done either in 16 or 17. Seems soon, to me, to have this issue but what do I know.
I have some cabachons I will also offer, which might interest someone. One would be sweet set in a wood frame, like trinket box top, or a wooden tray for change or as a decorative element on a wall key holder\dog leash holder or memo board. Have to see.
Jewelry at http://www.TalismanToo.Etsy.com
Chalkbags at http://www.ClimbAddictDesigns.Etsy.com
|
|
neebee
Social climber
calif/texas
|
|
|
Feb 16, 2019 - 01:49pm PT
|
hey there. say, happiegrrrl... say, at the link...
it is YOUR page only, right...
and then, it has a 'hit' button and it says, 108 more ...
i will click on it now, but, still wanted to check if those are
going to be your work...
how soon do you need sales?
i am trying to do this for after the 28th of the month...
i will tell share the link, as well...
now a days, though, i only know a few folks that like jewerly,
and, of course, i just make my own, but, it is 'junky stuff'
with odds and ends, and i surely do not mind to buy
one of your lovely pieces...
>:D<
prayers and god bless... :)
|
|
neebee
Social climber
calif/texas
|
|
|
Feb 16, 2019 - 01:50pm PT
|
hey there, say, nearly fogot...
and--
happy good happie day... :)
pet the pup-dog there, too...
and give him a hug...
:)
|
|
Happiegrrrl2
Trad climber
|
|
|
Topic Author's Reply - Feb 16, 2019 - 04:18pm PT
|
Neebee, you are the most thoughtful and generous person I have ever met. You may not be in the Top 2% of the wealthiest people financially, but I'm pretty sure you're in the Top 2% richest in generosity in the world.
Don't even think about buying a piece of my jewelry to help me with this. Actually, I would like to make you a piece as a gift. You've given so much to so many. I have some pieces I need to make beforehand, but would like to know if you like silver or copper wire better, and what colors of stones you like.
|
|
neebee
Social climber
calif/texas
|
|
|
Feb 17, 2019 - 12:08am PT
|
hey there say, oh my... dear terrie...
awwww... copper...
but-- i will still order something... >:D<
i just want to make sure that i am not late... :)
|
|
Gnome Ofthe Diabase
climber
Out Of Bed
|
|
|
Feb 17, 2019 - 01:30am PT
|
I hope that providence shines on you, I would do more if I could
I have added those 2 pictures, from your above post, and your links as well as a mention of 'Wall Art' with a recommendation;
To the, below, request from Mnt Proj, David D · 17 hours ago · Da South · Joined Aug 2018 · Points: 0
Not sure if this is the right forum but didn't know where else it would go. favorite climbing partner just bought her first house. Need ideas for a clever, climbing themed housewarming gift. Any help is appreciated.
https://www.mountainproject.com/forum/topic/116537981/housewarming-gift-for-climber#ForumMessage-116540215
|
|
Happiegrrrl2
Trad climber
|
|
|
Topic Author's Reply - Feb 17, 2019 - 10:19am PT
|
Gnome - Thank you.
Bad Climber - I do have an adapter to run things - the Plug In is the problem. Not a big deal, but it is helpful to plug the phone/laptop in while between towns, instead of relying on finding an outlet to plug into to recharge. Most libraries now accommodate the mobile crowd, but not always, plus libraries aren't always open. Coffee shops work to - sometimes - if there is a space by a plug. But of course then you're spending money on some food or beverage.
I'll have it looked at when I get back to NY this summer.
For now - back to the brakes issue - I mentioned having some cabochons for sale as well, to help raise funds. Here they are.
1)Deschutes Jasper Oval Cabochon - $40
I purchased this piece last year but didn't realize how chunky it was. It's a beautiful piece, and would be cool on a belt buckle, or hatband, if someone works with leather, or has someone who does metalcrafting. Or, placed on a small easel, a rather nice decorative element on a curio shelf. It has a flat top with lightly rounded edges to the side. The finish is a stain, not glossy.
To learn more about Deschutes Jasper, and see similar cabs and pricing, you can go to the following link. As you'll see, $40 is a very good price for this piece.
https://www.barlowsgems.net/deschutes-jasper-cabochons/
2)Deschutes Jasper Cab Trapezoid Shape $25 - not my work - issues as below:
This was also a purchased piece, but the seller did not disclose some issues that make it not workable for me. It was cut from an "end piece," meaning that the back of the cab is not a clean cut. There is major crevices on the back and sides, which make it unattractive in a wire wrapped setting. It is much thinner than the above one, and also has a flatt top with edges rolled into the sides. At the bottom, front, the shape is curved rather than straight sided.
I was thinking that I could use it at some point with a metal backing, when I become proficient in smithing. The back really does need to be covered, both to mask the messiness, and for the stability of the stone. I wouldn't suggest this as a display piece like the above, unless the owner was okay with the idea of someone looking at the back and being disappointed.
It could be placed within a frame of wood, shaped as a bezel, for someone who is good with woodcraft. It would be a cool design element on a trinket box, in that way. But one would need to form a frame that wraps the sides and holds it in that way.
Here is a backside view, to show what I mean by the issues:
3) Oval Deschutes Jasper Cabochon - My work - $25
This piece also has some issues with the back, but rather slight in comparison the one above.
The lapidary work, being mine, is not as fine as the two above. The polish is not as nice, and I did the best I could with creating a perfectly symmetrical geometric shape, but it was a thin stone and so I was limited with how long I could work it before grinding down to nothing.
It's too long sideways to be appropriate for jewelry unless someone was going to make a collar style piece, which at present is not my style. I was thinking I would hold on to it and either work as a decorative element in the lid of a metal box, or have someone create a wood box with it inlaid, which would be more likely. It would look awesome placed within, say, a black walnut setting on a box lid or tray.
I have several other cabochons I could offer, both my work and that of others. Some are quite nice, and priced between $12 and $25, plus shipping. If someone has interest, send me a message, and I can send some pictures.
You can reach me via the Contact Link in my shop at https://www.etsy.com/shop/TalismanToo I would then work via email to complete, through PayPal, since these cabs are not listed in my Etsy shop.
|
|
Juan Maderita
Trad climber
"OBcean" San Diego, CA
|
|
|
Feb 17, 2019 - 12:33pm PT
|
Blinny, Thanks for noticing and the appreciation.
Happiegrrrl2,
The van needs framework, and fast. I've made an appointment and trying not to use the van until the issue is resolved. I heard metal on metal about a week ago, and hoped there was just a pebble in there, since I'd had all brakes done either in 16 or 17. Seems soon, to me, to have this issue but what do I know. When you wrote "framework", I'm assuming that you meant "brake work"?
How many miles have you driven since your last brake job? An E150 should expect maybe 30K to 50K miles, guessing due to many variables.
When you have the front brakes checked, take note:
If the wear on driver's side vs. passenger side is vastly different, or if the inboard and outboard pads on the same side wear unequally, that points to a problem with a sticking brake caliper (the piston that hydraulically squeezes the brake pads against the brake rotor not releasing properly). In which case, replacing the brake pads will again result in premature wear until the caliper is replaced. (Caliper $50 - $80 per side, with little additional labor when replacing brake pads).
A tip for making brakes last longer: Many people don't manually downshift their automatic transmissions, or even know how/when to do that. Save your brake wear by downshifting on grades. You probably have the 4-speed automatic with an overdive (4th gear) on and off button on the end of the shifter knob. Turning off the overdrive puts it in 3rd gear for descending grades on highways steep enough to have to apply brakes. Slower speed grades (maybe 35 to 40 mph) select 2nd gear. On a typical roundtrip up and over the mountains, I might manually shift my heavy E350 van 20+ times, almost never touching the brakes. If you already know this info, sorry.
Hope this info helps.
|
|
Happiegrrrl2
Trad climber
|
|
|
Topic Author's Reply - Feb 17, 2019 - 01:03pm PT
|
Yes, it should have been brake work. I posted with my phone that time. It loves to incorrectly correct my words...
Glad you mention the mountains driving. My van has no on/off overdrive button. Just the shifter on the column, and goes left to right:P, R, N, D(overdrive), D (nonoverdrive), 1. I assume should use nonoverdrive D for mountainous. Correct?
It seems to the brakes needing work is too soon after last time. At the very low end of average mileage for pads. I don't brake heavily, not drive fast where one needs to brake. I pride myself on NOT using brakes from following too fast/close.
|
|
plund
Social climber
OD, MN
|
|
|
Feb 18, 2019 - 09:23am PT
|
I ran an '77 E-150 for years; it was quite the party mobile! Mine had the straight-6 300, nearly bombproof.
I DID notice that I needed to replace the front brakes (disk) much more frequently than the rears (drum), probably due to the vehicle weight and the disproportionate braking forces.
'Normal' disk-brake pad replacement is about as easy a repair as exists...FWIW....
|
|
SC seagoat
Trad climber
Santa Cruz, Moab, Bozeman, the ocean, or ?
|
|
|
Feb 18, 2019 - 01:35pm PT
|
Oh no. You killing me.
Are they all on Etsy?
Thanks. Susan
|
|
tradmanclimbs
Ice climber
Pomfert VT
|
|
|
Feb 18, 2019 - 02:24pm PT
|
they can cook up fast in western mountains. we smoked ours pretty bad coming from medicine wheel down into lovel last summer. Also the calipers can get stuck and will wear them out much faster.
|
|
jbaker
Trad climber
Redwood City, CA
|
|
|
Feb 18, 2019 - 04:11pm PT
|
Beautiful work, Happie!
|
|
|
SuperTopo on the Web
|
Let us know!