Discussion Topic |
|
This thread has been locked |
Messages 1 - 37 of total 37 in this topic |
OlympicMtnBoy
climber
Seattle
|
|
Topic Author's Original Post - Oct 17, 2014 - 05:56pm PT
|
Allright, I know there are some jewelers and other stylish folk on this site. Help a climber out!
I'm getting married in June and I got her ring all taken care of and stuff, but she keeps asking me about mine. I've never worn jewelry in my life, but I figure I ought to get a ring.
Not being a jewelry person, a lot of rings look pretty much the same to me, so I thought maybe I could try to find/have made something more representative of me. I'd like it to be climbing/mountain related and I thought of a hexentric (yes, I'm old enough to have climbed on them).
Would it work to have a ring in the shape of a hex (circular on the inside of course), or would this end up horribly uncomfortable? Does anyone make such a thing? My google searching has not resulted in much.
I was also thinking of the whole mountain profile in a ring thing, there are lots of styles on etsy if I search for "mountain ring". I have a spot spot for the Olympic Mountains in Washington that would be cool to have in profile.
Even better if i can get it engraved on my hex!
Or is this all a horrible idea and I'm going to hate wearing a ring and lose it in a week anyways (i.e. get a cheap plain titanium ring)?
Other cool climbing related ring suggestions?
|
|
cragnshag
Social climber
san joser
|
|
Oct 17, 2014 - 06:01pm PT
|
If you get a tattoo of a ring on your finger, you will never lose it nor get your ring/finger stuck in a crack.
|
|
ruppell
climber
|
|
Oct 17, 2014 - 06:11pm PT
|
I just keep the ring on a piece of perlon and wear it as a necklace. I wear it like that every day and it's impossible to loose or get stuck.
|
|
bergbryce
climber
East Bay, CA
|
|
Oct 17, 2014 - 06:16pm PT
|
ring shopping really sucks.
look online, there are a lot of boutique ring makers selling interesting things there. you can get some ideas on etsy, or even buy your ring there. the brick and mortar jewelers are basically all selling the same, pretty boring things and going there is (mildly) soul sucking. cool idea and good luck.
|
|
ß Î Ø T Ç H
Boulder climber
extraordinaire
|
|
Oct 17, 2014 - 07:55pm PT
|
... ring/finger stuck in a crack. Even just having them hang on an edge will put the fear of god in ya real quick, but
I still wear my wedding ring and one my deceased mom gave me anyway.
|
|
Lorenzo
Trad climber
Oregon
|
|
Oct 17, 2014 - 08:21pm PT
|
I know a guy who peeled all the skin off his ring finger that way.
|
|
Moof
Big Wall climber
Orygun
|
|
Oct 17, 2014 - 09:02pm PT
|
Congrats Stewart!
|
|
Studly
Trad climber
WA
|
|
Oct 17, 2014 - 09:14pm PT
|
Congratulations Stewart!
|
|
phylp
Trad climber
Millbrae, CA
|
|
Oct 17, 2014 - 09:19pm PT
|
Big congratulations to you both!!
I think it would be horribly uncomfortable.
And Really the ring has nothing to do with who you are or climbing. I wear almost no other jewelry than my wedding and anniversary rings. What I love about them is the weight of the metal on my finger. It's a reminder of the person I love. What message are you sending to you wife to be to merge that symbol of her with climbing?
You also love climbing. That's Great, so there are lots of ways to express that. You can get a hexentric charm and wear it as a neclace or bracelet. I always Think it looks sexy when guys wear a discrete piece of jewelry.
|
|
hossjulia
Trad climber
Carson City, NV
|
|
Oct 17, 2014 - 09:21pm PT
|
I've seen one just like you want. Damned if I can remember where. ORG maybe? It was on a climber.
Take a small hex, cut it the thickness you want the ring and go from there. but aluminum sucks. Bad idea.
Good luck and congrats!
edited; phylp has a good point!
|
|
Off White
climber
Tenino, WA
|
|
Oct 17, 2014 - 09:25pm PT
|
I think we were married for 7 years before we got rings, and as a carpenter and climber I kept taking it on and off, de-gloving is no joke. One winter day with swollen digits it wouldn't go on the ring finger, so I stuck it on the pinky where it was a little loose. I'm guessing it came off on a chairlift when I pulled off a glove, never saw it again.
Went without for a number of years, then got one tattooed on for my 25th wedding anniversary. We had family tattoo night while visiting my daughter in Asheville. I've had several people look at it and say, "whoa, that's commitment" to which I usually reply, "not really, if I get divorced I'll just cut it off."
It's my only ink, I'm content to wear it until I die.
|
|
nah000
climber
canuckistan
|
|
Oct 18, 2014 - 05:38am PT
|
google "hexagonal ring"...
here are a couple but it looks like there are lots more...
i know you said you didn't want it to be hexagonal on the inside, but it might not be as bad as you think...
|
|
Tvash
climber
Seattle
|
|
Oct 18, 2014 - 08:52am PT
|
Congratulations St!
You can order a stock Ti ring for about 60 bucks at a number of places - inside engraving included. I wonder how much they'd charge to fine mill or engrave an outline of the Olympics around the outer surface?
Ti rings are usually a side business for aerospace parts manufacturers, so they usually have the capability to do just about anything.
Pat
|
|
apogee
climber
Technically expert, safe belayer, can lead if easy
|
|
Oct 18, 2014 - 10:24am PT
|
Congrats on the impending nuptials! Very exciting times.
Personally, I prefer a low profile, simple ring, and wear it on a chain around my neck when I'm doing anything serious with my hands. I'd find a hexagonal ring (or anything with similar projections) to be terribly annoying.
"...de-gloving is no joke."
(Graphic picture warning! Scroll with your eyes closed!)
|
|
Crazy Bat
Sport climber
Birmingham, AL & Seweanee, TN
|
|
Oct 18, 2014 - 12:27pm PT
|
My brother does Mountain rescue in Albequrque. He also designs jewelery with his wife. Give him an email. He can be contacted through their website at attawaygems.com.
|
|
OlympicMtnBoy
climber
Seattle
|
|
Topic Author's Reply - Oct 18, 2014 - 02:49pm PT
|
Thanks for the congrats and advice everyone! Yeah, I know the significance of the ring is more important than the thing itself, but I thought it might as well be something I like if it's my only piece of jewelry. Haven't made my mind up yet so it sounds like I'll have to do some emailing/asking.
I hadn't actually googled Hexagonal Ring. I was of course thinking of the climbing hex shape, but maybe I can find someone to ask about a custom lopsided version?
I had no intention of climbing with the thing, the breakable cord around the neck is probably my best option there.
No thanks for that picture! :-) I didn't need to see that to know what was meant.
Keep the suggestions coming though! I find it hard to believe no climber has ever thought of a hexentric ring before. Maybe I'll just have to take a hacksaw and a drill to the shiny #5 BD hex I never use. I can't bear to do that to the vintage Chounaird one as that would break up my set. Of course I don't want to actually wear aluminum.
|
|
apogee
climber
Technically expert, safe belayer, can lead if easy
|
|
Oct 18, 2014 - 04:24pm PT
|
", the breakable cord around the neck is probably my best option there. "
If that 'breakable cord' breaks while you're 6 pitches up, and you lose that thing, both you & your betrothed would be really bummed. In such places, maybe better to take it off & safely store it somewhere.
|
|
Moof
Big Wall climber
Orygun
|
|
Oct 18, 2014 - 08:09pm PT
|
I went with a simple gold band. I am more attached to it than I expected I would be. I was given the green light to not wear it if I didn't want to, but I still like to wear it. It goes either on my climbing shoe biner onto my harness at the gym, or in the otherwise useless cargo pocket of my climbing pants when I am outside. So far no issues.
I hate crap around my neck.
To each his own.
|
|
pud
climber
Sportbikeville & Yucca brevifolia
|
|
Oct 18, 2014 - 08:31pm PT
|
Don't wear anything on your fingers capable of taking them off.
|
|
NutAgain!
Trad climber
South Pasadena, CA
|
|
Oct 19, 2014 - 02:28pm PT
|
For day-to-day wear, put a lot of thought into the feel of the edge of the ring against your skin. It's easier to think about how it looks rather than how it feels when you are in the shopping around phase.
Even if you are fine with the edges for normal wear, think about holding hands with your spouse, or someday holding hands with children if that is in your future. The sharp edges on my ring sometimes get in the way for that.
|
|
crusher
climber
Santa Monica, CA
|
|
Oct 19, 2014 - 10:31pm PT
|
Just leave it at home when you go climbing...why risk losing it from around your neck? Oh, and congrats! You shouldn't have too much trouble finding a custom jeweler in Seattle who can craft it for you - sounds cool!
|
|
Rockies Obscure
Trad climber
rockiesobscure.com....Canada
|
|
Oct 20, 2014 - 10:00am PT
|
Once, when I got married, I was also not looking forward to buying myself a ring as I don't enjoy jewelry. When I was in the Sonora area, I went into a blacksmith shop in that old heritage town. They sold black steel rings($2)that kinda even look like mini pitons. They are actually horseshoe nails.
Horseshoe nails represent wedding rings from the 1800s for those whom could not afford pricey ones back then!
Short history here....
https://www.etsy.com/ca/listing/162037290/horseshoe-nail-ring
Have it powder-coated black, that way the original paint will never come off even climbing with it.
congrats
|
|
Tvash
climber
Seattle
|
|
Oct 20, 2014 - 10:03am PT
|
A dremel tool with a fine sander and buffer will take the sharp edges off of any ring right quick.
|
|
Tvash
climber
Seattle
|
|
Oct 20, 2014 - 10:27am PT
|
One DIY option:
Find a thick walled stainless bushing (commonly known as a spacer ring) that's the size closest (but slightly smaller than) your ring size.
Have an auto shop or machine shop bore it out to the correct size for your finger.
Dremel the inner edges with a sander + buffer head to radius and polish them for comfort.
Belt sand or bench grind the outer surfaces to form the hex. You can print out the following drawing to the right scale on label stock and adhere it to the actual workpiece.
Finished the outer edges with the Dremel, than the entire outer ring with a bench grinder polishing wheel with the right polishing compound for stainless.
Other than boring the inner diameter out - sub 2 hour project in my shop, easy.
It'll match your crampons...
Plus, you can use it for pro in a pinch
|
|
Tvash
climber
Seattle
|
|
Oct 20, 2014 - 10:33am PT
|
One template. You'd probably want to thin the walls out a bit, though. Looks heavy.
|
|
Offset
climber
seattle
|
|
Oct 20, 2014 - 10:40am PT
|
to stir the pot a little... Why do you want a ring that is about you and your climbing?
isn't the ring about your commitment to your life going forward ...with your wife? when i look at my ring i think of my wife.
ymmv..fwiw..etc...
congrats d00d!
oh.. and i second the thoughts about the sharp edges and how it feels wearing it.
|
|
Gnome Ofthe Diabase
climber
Out Of Bed
|
|
Oct 20, 2014 - 10:46am PT
|
How old are you? does a ring mean that much to either of you ?
Be the persons' you are and do not conform to static conventions
The only thing that never changes Is change itself.
From two climbers, joined at the hip.
We did not exchange rings at our wedding
Good luck and cheers
have a super great wedding. </;~D
|
|
Tvash
climber
Seattle
|
|
Oct 20, 2014 - 10:49am PT
|
Art is cool.
BTW, I have a vintage hex that's the perfect size for a practice work piece. Trade ya for an old rope ;)
|
|
Stevee B
Trad climber
Oakland, CA
|
|
Oct 20, 2014 - 10:55am PT
|
My wife got us a pair of these Qalo rings to wear when we climb. I love it. Went crack climbing wearing it yesterday, no worries. We have normal rings too. I do remember planning to do something grand and creative, then I remembered that jewelry is not a priority to me and snapped out of it.
|
|
monry
Gym climber
Sydney
|
|
Dec 16, 2016 - 09:24am PT
|
On top of their great quality diamonds, and with their amazing knowledge, you know when you are speaking to truly great professionals at Kush Diamonds. Highly recommend Kush Diamonds http://www.kushdiamonds.com.au! Experience it for yourself! You won't regret it!
|
|
Brandon-
climber
The Granite State.
|
|
Dec 16, 2016 - 10:16am PT
|
I wear a twelve dollar silver ring on my hand proudly, have so for four whole months. Yeah, it's become ovalized, but it fits my hand better now, so that's great. As a tradesperson, I'm marginally concerned about it in the event of a hand smashing incident. I've been told that magnesium rings will shatter, rather than crush, if you smash your hand. So, when I buy a new ring, it might be magnesium.
Or, it might be a super baller ring, with gems and stuff. Who the f*#k knows, it's just a symbol.
|
|
looks easy from here
climber
Ben Lomond, CA
|
|
Dec 16, 2016 - 01:49pm PT
|
On top of their great quality diamonds, and with their amazing knowledge, you know when you are speaking to truly great professionals at Kush Diamonds. Highly recommend Kush Diamonds http://www.kushdiamonds.com.au! Experience it for yourself! You won't regret it! Thanks for the insightful post, spambot.
Between climbing, working in a hospital, and firefighting, my wife and I haven't worn our rings for probably 5 years now. I tried to put mine on for my brother's wedding 3 years ago and it wouldn't get past the last knuckle.
|
|
Stellarin
Sport climber
USA
|
|
Mar 24, 2018 - 07:23am PT
|
I'm also trying to find a hexa-ring but in addition, I want to make an engraving on it. With names of my friend and my wife. It should look cool and will be absolutely unique.
|
|
hellenakis
Ice climber
LA
|
|
Mar 24, 2018 - 07:30am PT
|
Hi Stellarin,
I'm not sure about the hexa-rings, but for sure, you can check Laser Engraving store and they will make you any engravement on it like you wish. They have many types of the rings on the website, maybe you can also find there a hexentric one.
Good luck.
|
|
Jim Clipper
climber
from: forests to tree farms
|
|
Mar 24, 2018 - 10:11am PT
|
How bout a ring of stacked hexes around the band (in profile). Maybe add a couple of stacked nuts. Find some granite or quartz with gold and inlay it in one or a few of the hexes.
kind of like this but with hexes?
|
|
ec
climber
ca
|
|
Mar 24, 2018 - 04:01pm PT
|
BITD, I just hit-up this machinist friend and he cut a #11 Hex for bracelets (open and closed). They were even bead blasted or polished. I think BD even sold some of their own at one time after that. So, creating a ring out of original stock wouldn’t be so difficult.
ec
|
|
Messages 1 - 37 of total 37 in this topic |
|
SuperTopo on the Web
|