home made gear!

Search
Go

Discussion Topic

Return to Forum List
Post a Reply
Messages 1 - 20 of total 26 in this topic << First  |  < Previous  |  Show All  |  Next >  |  Last >>
whitemeat

Big Wall climber
San Luis Obispo, CA
Topic Author's Original Post - Sep 8, 2013 - 04:11pm PT
this is what I just made!
Credit: whitemeat
Credit: whitemeat
jcory86

Big Wall climber
Grass Valley, CA
Sep 8, 2013 - 06:46pm PT
the original hammer on WDD
the original hammer on WDD
Credit: jcory86

Heres a shot of my first hammer. A modified roofing? drywall? hammer. Ground and shaped back of hammer head, drilled holes for funkness and in handle for cord attachment.
I own a Kong eagle now! The route is Wet Denim Daydream on the Leaning tower.
rincon

Trad climber
SoCal
Sep 8, 2013 - 07:01pm PT
Sterno stove
Sterno stove
Credit: rincon
eKat

Trad climber
Less than a second shy of 49 minutes
Sep 8, 2013 - 07:20pm PT
Meat. . . tell us how you made it. . . and keep up the good work. . . gear design and construction is extremely rewarding!

Plus. . . makin' your own stuff is, quite simply, where it's at!

YeahBaby!
TGT

Social climber
So Cal
Sep 8, 2013 - 07:24pm PT
First hammer was one of these.



Bell system linemans drilling hammer.

I sawed the handle down and added a cord.

Can't remember who I gave it too. About that time nuts came into vogue and I quit carrying a hammer.

Made several a couple of sets of hexes from various sizes of scrap aluminum barstock. Tobin ended up with one set, don't remember what happened to the other.

There were also some wide nuts out of I beam aluminum sections. In retrospect they were way to thin. (thank God nobody ever fell in one)

Lots of soft goods experiments, from a Frostline 60/40 parka to homemade packs, cagole and a belay seat.

The parka and the belay seat were a success, the other stuff not so much other than the gear sling.

The gear sling was made from 2" tubular that was folded over and sewn to form a tube for the gear part.

Glad to see the backyard DIY tradition continues.

Never did get into doing walls.



eKat

Trad climber
Less than a second shy of 49 minutes
Sep 8, 2013 - 07:25pm PT
A N D .. .. .. rincon. . . LOVE the little cooker.

YAY!
eKat

Trad climber
Less than a second shy of 49 minutes
Sep 8, 2013 - 07:27pm PT
It's just so bitchen to make your own stuff. . . it's like the essence of wall climbing. . . identify what you need, think about it and build it. Why go poundin' down a bunch of fundage for stuff you can make?

LOVE IT!

I get really good OLD SCHOOL vibes from this!

Go!
whitemeat

Big Wall climber
San Luis Obispo, CA
Topic Author's Reply - Sep 8, 2013 - 09:07pm PT
the whole reason I made the hammer hulster is I used the BD one and after pitch 2 it broke and went flyen down the mountain! I just took non tubular webbing and used that with a small latch system to make the part that attaches to the harrness and for the hulster I just took tubular webbing and put drip line tubbing inside it and sewed it on!

some other home made stuff:

cam hooks, belay seat, and rappel rings!
j-tree

Big Wall climber
Classroom to crag to summer camp
Sep 8, 2013 - 09:13pm PT
cam hooks?

might that be a lot of tension for a handmade piece to deal with? especially when made by a non-metalworker?
Ron Anderson

Trad climber
Soon to be Nipple suckling Liberal
Sep 8, 2013 - 09:16pm PT
Thumbs up dood, did much the same myself at about the same age! I even made a harness or two. Pawn shop commercial sewing machine and the world was mine...
Crazy Bat

Sport climber
Birmingham, AL & Seweanee, TN
Sep 8, 2013 - 10:02pm PT
Whitemeat Gear Company? LOL!
Ron Anderson

Trad climber
Soon to be Nipple suckling Liberal
Sep 8, 2013 - 10:04pm PT
Dont laugh,, its gotta RING to it! LMAO! The next Y-VON Coolyard perhaps?
eKat

Trad climber
Less than a second shy of 49 minutes
Sep 8, 2013 - 10:22pm PT
Nah. . .

"MeatMade"

:-)
Ron Anderson

Trad climber
Soon to be Nipple suckling Liberal
Sep 8, 2013 - 10:24pm PT
ok dats GUD too!


and Whitemeat, my only advice,, stay away from pin bin bandoleer type gear sling ideas lol! Its been done,, epic fail..
eKat

Trad climber
Less than a second shy of 49 minutes
Sep 8, 2013 - 10:26pm PT
Yeah. . .

"MeatMade. . . Where OldSkoolRoolz"
TGT

Social climber
So Cal
Sep 8, 2013 - 10:28pm PT
the only way to become a "metalworker",

is to work with some metal.

(just do the testing about three feet off the ground)
whitemeat

Big Wall climber
San Luis Obispo, CA
Topic Author's Reply - Sep 8, 2013 - 10:55pm PT
you guys are the best! I gota get me a sewing machine! I also have made a tiny copperhead... hope I dont have to use it!
eKat

Trad climber
Less than a second shy of 49 minutes
Sep 8, 2013 - 11:06pm PT
RightOn. . . you're gonna LOVE having a sewing machine. . . it will open doors you never even knew existed!

BITCHEN!

:-)
eKat

Trad climber
Less than a second shy of 49 minutes
Sep 8, 2013 - 11:08pm PT
In the meantime, get one of these. . . they're indispensable!

http://www.speedystitcher.com/
MisterE

climber
Sep 8, 2013 - 11:14pm PT
I always liked the home-made "racks" that I saw occasionally from the German sandsone climbers - tied slings and knots - no metal allowed.

One guy in Tuolumne pulled out the collection he had brought on the flight over. It didn't set off any metal detectors, but did cause some discussion.

He said: "My rack or yours?"

I said: "Mine."
Messages 1 - 20 of total 26 in this topic << First  |  < Previous  |  Show All  |  Next >  |  Last >>
Return to Forum List
Post a Reply
 
Our Guidebooks
Check 'em out!
SuperTopo Guidebooks


Try a free sample topo!

 
SuperTopo on the Web

Review Categories
Recent Trip Report and Articles
Recent Route Beta
Recent Gear Reviews