Let's see your knife

Search
Go

Discussion Topic

Return to Forum List
This thread has been locked
Messages 161 - 180 of total 218 in this topic << First  |  < Previous  |  Show All  |  Next >  |  Last >>
StahlBro

Trad climber
San Diego, CA
Nov 16, 2015 - 01:47pm PT

Picked this up on the rez.
Justin Sanchez

Big Wall climber
Valley
Nov 16, 2015 - 08:21pm PT
Bought this one in Anchorage, Alaska in about 2001 or 2002. The steal is so dang hard we tried to sharpen it by hand with stone and got absolutely nowhere. At some point took it to a sharpener who ran it through a "grinder" type sharpener and kinda ground the sh!t out of it but didn't really establish a sharp edge, (maybe 2005). Now this bad boy is used frequently to open large cardboard boxes for furniture and such and its slim and dull but wicked hard steal makes the perfect tool for seperating big boxes where razor knifes don't work and a letter opener is is a little too soft and small. I took the handle off recently to save a little weight in my toolbag and so it can dive a little deeper to separate huge boxes.

I think Benchmade uses top grade steal and if you can find someone to competently sharpen it it's a good investment. I have a Benchmade switchblade too that has uniquely hard steel, it has nice aesthetic properties but it's hard to put an edge on and has a very dumb design flaw where the knife commonly opens when subject to minor jostling in your pocket or on your belt.

What does y'all think about Benchmade knives?
this just in

climber
Justin Ross from North Fork
Nov 16, 2015 - 09:28pm PT
Justin, Benchmade uses mostly 154CM steel I think and is a higher end Stainless. It is a durable steel that should hold an edge and not be too hard to sharpen. I think the angle might be messed up from the stone or grinder. 17° is the ideal for a razor sharp edge, 20° is good for meat cutting, 25 for hunting and 30 for cutting cardboard.
Sounds like yours might be at 30 or above. They sell some good sharpener system guides that adjust to the angle you want.
From what I've read about them and the few videos I've watched they make life look easy. I use a belt sander to sharpen my blades, but mine aren't always precise. Haha.
Reilly

Mountain climber
The Other Monrovia- CA
Nov 16, 2015 - 09:33pm PT
I use a belt sander to sharpen my blades, but mine aren't always precise. Haha.

Justin, I hope you aren't doing that to a $300 Benchmade! :-/

Benchmade are nice but I can't bring myself to pay that when I can get a
damn nice Puukko for $40-50, well, if I didn't already have a Puukko I got
for $10. I'm saving up now for a Bear Grylls so I can be BAAAD!
this just in

climber
Justin Ross from North Fork
Nov 16, 2015 - 09:36pm PT
Reilly I can't afford Benchmade either.
:-)
http://www.wickededgeusa.com/product/wicked-edge-field-and-sport/
I'd probably spend 300 on this instead.
Reilly

Mountain climber
The Other Monrovia- CA
Nov 16, 2015 - 10:04pm PT
That's a slick system, but I'm too cheap for that, too. For years I've
sharpened with PSA sandpaper stuck to a big piece of 3/8" float glass.
Sandpaper is mighty cheap, like me, and you can get it as fine as you want.
On my Japanese chisels I'll run 'em up to 2000 grit and that's a mirror finish.
I don't bother to go that far on a knife.
c wilmot

climber
Nov 16, 2015 - 10:26pm PT
Lots of cool knife/puokko stuff on this blog

https://nordiskaknivar.wordpress.com/2013/01/13/yrjo-puronvarsi-blades-yp-taonta/

this just in

climber
Justin Ross from North Fork
Nov 16, 2015 - 10:29pm PT
Haha, right on Reilly.
My step-dad's mom passed this year and this was an Ulu she had. Think it is from the 20's or 30's.
Justin Sanchez

Big Wall climber
Valley
Nov 17, 2015 - 11:35am PT
You guys are right 154cm steel.. will grind away your stone more than the knife! But ya this puppy was about 120$ new and that was 15 years ago and it's still a part of my everyday tool kit. Thanks for the info on the angles. Def lost the factory angle when it hit the grinder.
SeaClimb

climber
Nov 18, 2015 - 01:43pm PT
My cousin's knives are amazing. World class. Makes world class working knives and works of art. Check them out. He comes from the Ruanas. My grandfather was a knifemaker and it's still in the family.

http://www.rhrgrandknives.com
MikeMc

Social climber
Nov 18, 2015 - 02:22pm PT
This my everyday carry knife. I use it dozens of time daily, and feel naked when I forget it, or misplace it.

Browning.

overwatch

climber
Nov 18, 2015 - 02:43pm PT
That is some beautiful work there Seaclimb
this just in

climber
Justin Ross from North Fork
Nov 18, 2015 - 03:28pm PT
Wow Seaclimb, definitely World Class. Love looking at those thanks a lot. The one below is amazing.
SeaClimb

climber
Nov 18, 2015 - 05:19pm PT
he spent years learning damascus
jeff constine

Trad climber
Ao Namao
Nov 22, 2015 - 08:39am PT
My Thailand Jungle Knife Collection. All sharp as a razor.
ClimberDave

Trad climber
The LBC, CA
Dec 31, 2015 - 01:45pm PT
I got my first Japanese blade this year for Christmas.

A 210mm Gyuto made with Japanese hand hammered Blue Steel with a Pakkawood Handle

Haven't had much chance to use it much yet but it seems to be waaay sharp very lightweight and easy to maneuver as well as being pretty well balanced.
Looking forward to using it a lot In 2016 and posting up pics in the Food Porn Thread!!
Flip Flop

climber
Earth Planet, Universe
Jan 7, 2016 - 11:11pm PT

Found in the gutter in South Fork today.
If you knew the stories
You might laugh.
Or shudder.
this just in

climber
Justin Ross from North Fork
Jan 8, 2016 - 07:57am PT
Dude finding that in South Fork I'd shudder!
this just in

climber
Justin Ross from North Fork
Jan 8, 2016 - 08:09am PT
This was in 1987, I was 4. They took him up to the Cascadel pond and cut his head nearly off. Jeremy and I lived next to the pond and I still remember the police crime scene tape.
I'm sure that blade has nothing to do with this incident, but it looks like both Jeremy and I thought of it.

Statement of Facts

On the evening of December 16, 1987, defendant and three companions, Clifford Knight, David Knight, and Mike Tex, were at the Hard Times Tavern. When the bar closed at midnight, the group left together, taking a six-pack of beer with them.

At approximately 1 a.m. on December 17, Johnny Smith, who was staying at the South Fork Motel, was awakened by someone pounding on the door of the room next to his. Herman Cube, a Southern California Edison employee, was staying in that room. Mr. Smith heard the intruders beating and choking Mr. Cube and repeatedly asking him for his keys. Mr. Cube had a Chevy S-10 Blazer, which belonged to his employer, parked in front of his room. One of the intruders also threatened "to send [Mr. Cube] back to China to his ancestors."

After about 15 minutes of a "continuous beating," defendant and one of his companions went outside and defendant opened the driver's door of the Blazer. Meanwhile, the beating of Mr. Cube continued in the motel room. A few minutes later, defendant and his companion went back to the motel room. Someone then said " 'Mike, lay off the guy, let's go, we got the keys.' "

Defendant entered the driver's side of the Blazer again. Two others immediately followed defendant, holding Mr. Cube, and shoved Mr. Cube into the back seat. Defendant then drove off up the hill. As soon as defendant left, Mr. Smith ran across the street to the Hard Times Tavern and called the sheriff.

While the sheriff's deputies were at the motel gathering information, the Blazer was seen coming back down the hill. Thereafter, a highspeed chase ensued over 13 miles of winding, narrow roads.

The chase was over when the Blazer turned onto a dirt road and stopped where the road ended. Four people then jumped out of the Blazer and ran. Defendant and Clifford Knight were apprehended at that time. David Knight and Michael Tex were arrested later.

At the time of his arrest, defendant appeared to have been drinking, but did not seem highly intoxicated. There was what appeared to be blood on defendant's shoes and pants. During the booking process, defendant threw [5 Cal. App. 4th 649] the keys to Mr. Cube's personal automobile and the motel room key into a garbage can.

Mr. Cube's body was found approximately three miles from South Fork. Although Mr. Cube had been severely beaten, the cause of death was blood loss from a deep, long neck wound which could have been inflicted by a saw found in the Blazer. Large amounts of blood were found in the Blazer and in the motel room. Defendant's fingerprints were found on the Blazer key and on the motel room door. Bloody shoeprints consistent with the shoes defendant was wearing were also found in the motel room. However, no prints matching defendant's shoes were found near the body.
Sierra Ledge Rat

Mountain climber
Old and Broken Down in Appalachia
Jan 8, 2016 - 08:42am PT
I just forged this baby from an automobile leaf spring


Messages 161 - 180 of total 218 in this topic << First  |  < Previous  |  Show All  |  Next >  |  Last >>
Return to Forum List
 
Our Guidebooks
spacerCheck 'em out!
SuperTopo Guidebooks

guidebook icon
Try a free sample topo!

 
SuperTopo on the Web

Recent Route Beta