Bolts needed on Etude, Suicide Rock, CA.

Search
Go

Discussion Topic

Return to Forum List
Post a Reply
Messages 1 - 20 of total 27 in this topic << First  |  < Previous  |  Show All  |  Next >  |  Last >>
guyman

Social climber
Moorpark, CA.
Topic Author's Original Post - Oct 4, 2012 - 04:52pm PT
The talk about the Bolt on Surprise and the bolts on Double Cross (JT)got me thinking about something.

It's about time we stopped replacing the fixed pins on Etude. Sometimes there are two of them sometimes 4.

They are always in the wrong spots and replacing them over and over is causing damage to the cracks. This is making the route easer.

I propose we give Mr. Clark Jacobs two bolts and hangers and have him locate these in good spots.

I trust him.

I know of a few pins that have been replaced with bolts on other climbs around there and no bolt wars got started.

What do you think?
Elcapinyoazz

Social climber
Joshua Tree
Oct 4, 2012 - 04:59pm PT
There is currenly one pin (not two, not four...we climbed it a couple weeks ago). It protects perfectly fine without the others. Take a green C3. If it is time to say goodbye to fixed pins (and I generally encourage that stance), then one bolt will suffice given the readily available gear.

Johnny K.

climber
Oct 4, 2012 - 05:02pm PT
^^ Exactly.

If anything remove the last pin and it may open up another bomber c3 placement.Bring a couple extra green and red c3's,the climb is well protected.
Fat Dad

Trad climber
Los Angeles, CA
Oct 4, 2012 - 05:34pm PT
Interesting thread. The only pin that I remember being necessary is/was (sorry, haven't climbed in a while) the knifeblade just before the crux. Maybe I need to go climb it again, but I don't recall thinking that a cam would have worked there.

If the pins have required some maintenance, it seems reasonable to consider placing A bolt instead. If the bolt is every pulled for any reason, the hole can be filled. It's not like they do that with pin scars. My only concern about placing a bolt is that guyzo unwittingly raised the question of how many to place. There already appears to be a disagreement over that already.

Also, I know some folks don't ascribe to the slippery slope argument, but if you place one bolt next to a crack like that, you start legitimizing the placement of bolts next to other cracks that may accept gear more readily.
guyman

Social climber
Moorpark, CA.
Topic Author's Reply - Oct 4, 2012 - 05:56pm PT
One bolt will do just fine.

Last time I did it - 2 years ago- there were 4 pins.... some in the holds.

If you can now place c3.... well that shows how much the holds are growing.

x15x15

climber
Oct 4, 2012 - 07:36pm PT
My vote is for no bolt/s be added to this climb. But then, I've done it when many pins were available, and when they were not available...

Yet, I understand guyman's stance. I wonder if I would feel the same way if i had never climbed etude...? It is a sweet classic that has not been on my must do list for a long time...

Can any of you old farts remember what the original fixed gear was?

I think étude is easier and safer than iron cross first pitch. Maybe add a bolt to iron cross? I hope not...
lcote

climber
Oct 4, 2012 - 11:29pm PT
Ever since I learned that the 5 fixed pins on Etude has been reduced to 1, I've given a lot of thought as to whether it was time to place bolts. My initial reaction was that adding bolts was appropriate; the cracks will no longer be degraded by placing pins and the pins will no longer intefere with the climbing. But the climb is still being boldly done on lead. Let's move climbing forward. There is a lesson to be learned from the Cerro Torre Compressor Route. Perhaps the climb may now be beyond my reach as a lead, I can live with that. Lets leave something so that the future of climbing can advance.
dustonian

climber
Oct 4, 2012 - 11:32pm PT
Etude would be perfectly fine without either fixed pins or bolts.
GDavis

Social climber
SOL CAL
Oct 5, 2012 - 12:13am PT
Lucas Dunn (The_Kid) led my weak ass up it no falls, with just the sh#t pins...

Etude would be perfectly fine without either fixed pins or bolts.

Very true. I think modern gear can protect it without the pins in place, right? Before I have any opinion on it I need to climb it again in its current condition. Otherwise, you know, I'm just talking out of my ass. Which is normal.
Johannsolo

climber
Soul Cal
Oct 5, 2012 - 02:13am PT
I pulled the two pins out about a month ago as they are not needed. The first one left a bomber small cam placement and the top one is just before the jug out right. Clean fall potential on a great pitch. I did discuss replacing the pins with bolts with Clark and they are not needed.
E

Social climber
Tujunga CA.
Oct 5, 2012 - 10:29am PT
how about removing one of the bolts on top of vampire mantle. climbed this several weeks ago and belayed in the crack -the old station. the belay now totally screws up the route. next time i will remove one of those bolts and trturn it to its original condition

is there a new bolt on surprise?

E
guyman

Social climber
Moorpark, CA.
Topic Author's Reply - Oct 5, 2012 - 11:36am PT
E ... Hi.

Good idea about the Vampire, I just love the long sling that hangs down from it... a extra hold.

The bolt on surprise is not true... someone got the info wrong.

About Etude, If the crack is now getting pounded out from repeted pin placements so be it.

We can have our own version of Senerity Crack.

Soon it will take #2 camalots.

I kinda liked climbing it when it was pretty much holdless.

looking sketchy there...

Social climber
Latitute 33
Oct 5, 2012 - 12:12pm PT
Etude would be perfectly fine without either fixed pins or bolts.

+1

how about removing one of the bolts on top of vampire mantle. climbed this several weeks ago and belayed in the crack -the old station. the belay now totally screws up the route.

I never really understood the logic of doubling the old protection bolt and making this the belay (except, you don't have to belay down and right). While it did change the character of the first pitch (a bit longer and more sustained), having done it both ways I'm not sure it really makes much of a difference.

It has been doubled/belay stance for a very long time now. It would seem that if you removed of one of the bolts now, it will likely create problems for most people doing the route now-days (guide books show it as the belay and few remember the old way). Removal seems counter-productive and I imagine it will quickly re-appear.
pyro

Big Wall climber
Calabasas
Oct 5, 2012 - 12:16pm PT
hey guyman nice thread!
when the old folks die off i'm going to march right in climb and add the bolt to etude.
until further notice i've boycotted stupid "ego-driven climber" roots!
mite

Ice climber
New York
Oct 5, 2012 - 01:13pm PT
My first reaction was that adding bolts was appropriate; the cracks will no longer be degraded by placing pins and the pins will no longer interfere with the climbing. But the climb is still being boldly done on lead. Let's move climbing forward.

http://www.siamvisit.com/
guyman

Social climber
Moorpark, CA.
Topic Author's Reply - Oct 5, 2012 - 04:41pm PT
My first reaction was that adding bolts was appropriate; the cracks will no longer be degraded by placing pins and the pins will no longer interfere with the climbing. But the climb is still being boldly done on lead. Let's move climbing forward.

Mite... I would agree but what is going on is this: If someone wishes to climb Etude, they show up with pins, pound them in, sometimes 4 or 5 sometimes they get left in place but mostly they get removed. Only the scars are left.....

not exactly clean climbing IMHO.
froodish

Social climber
Portland, Oregon
Oct 5, 2012 - 06:54pm PT
I haven't climbed regularly at Suicide since the 80's and it's been that long since I've done Étude, but seems like the handful of times I climbed it there were only 2 pins. Those seemed sufficient and I can't remember ever seeing someone with a hammer up on it. Are people really driving new pins into that thing these days?
Doug Tomczik

climber
Bishop
Oct 6, 2012 - 04:23am PT
not exactly clean climbing IMHO

Don't place bolts if it's clean climbing you're after.

They are always in the wrong spots

What are the right spots? Are there right spots?

Let's move climbing forward.

Clearly put Lcote. Let's maintain this philosophy that Suicide is rooted in. Sometimes leaving things as is moves climbing forward.
guyman

Social climber
Moorpark, CA.
Topic Author's Reply - Oct 6, 2012 - 01:17pm PT
Clearly put Lcote. Let's maintain this philosophy that Suicide is rooted in. Sometimes leaving things as is moves climbing forward.


Its a rare situation, the fixed pins have been getting changed out for bolts on a few climbs at T & S. The world has not stopped turning.

I think its a far better solution to use a bolt than some pin you can't trust to even be in place, or to hold.

And this stops the scars from growing and becoming very ugly....I think this really keeps the "clean" philosophy going.

Leaving things as "they are" means that folks WILL keep adding and subtracting those fu-kers and causing scars.

That makes the whole climb into one big growing pin scar....


And to edit... Dr. F .... when you "did it" "it" had pins... 2 or 3 and very thin wires.... now you can use cams. That should tell you something.

pyro

Big Wall climber
Calabasas
Oct 6, 2012 - 06:25pm PT
think its a far better solution to use a bolt than some pin you can't trust to even be in place, or to hold.

i can agree having a pin but only if i have a pin hammer to test/ring test it.
Messages 1 - 20 of total 27 in this topic << First  |  < Previous  |  Show All  |  Next >  |  Last >>
Return to Forum List
Post a Reply
 
Our Guidebooks
Check 'em out!
SuperTopo Guidebooks


Try a free sample topo!

 
SuperTopo on the Web

Review Categories
Recent Trip Report and Articles
Recent Route Beta
Recent Gear Reviews